Temperature transmitters

Temperature transmitters

These temperature transmitters are suitable for harsh environments IP65) with very long radio range.

Temperature transmitter - 2 external contact probes
( PT1000)

118 x 79 x 43mmTX TEMP CONT2 600-232
2 External 2.0m contact probes
Contact probes working temperature: -200°C / +250°C
Suitable for harsh environments (IP65)
Battery life: 5 years for 5mn transmission period
Very long radio range
Reference: TX TEMP CONT2 600-232


This Enless Wireless LoRa / LoRaWAN IP65 transmitter with two external temperature contact probes allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -200°C / +250°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.

Thanks to its two 2.0m probes, this temperature transmitter is especially suitable for applications such as monitoring of temperatures on inlet/outlet fluid circuits of all types and, in particular, continuous observation of sanitary hot water networks for preventing the health risk of legionella. It is also often used for temperature monitoring in cold rooms, or in agricultural environments.

This product is LoRa/ LoRaWAN compatible. It allows you to build an operated or private network. In LoRaWAN public mode, high-precision °C data is retrieved through the transmitter and sent to the LoRa network operator cloud at a flexible frequency. In LoRa Enless Wireless private mode, the data is transmitted over the radio to our Modbus receiver, which is usually connected to a gateway. In LoRaWAN’s private mode, the temperature data flows directly from our transmitter to the gateway.
High and low temperature thresholds can be viewed via the supervision system in place which also allows the configuration of alerts.

This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.

 

_____________________________________________________________________________

Temperature transmitter - 1 external contact probe ( PT1000)

118 x 79 x 43mmTX TEMP CONT1 600-032
External 2.0m contact probe
Contact probe working temperature: -200°C / +250°C
Suitable for harsh environments (IP65)
Battery life: 5 years for 5mn transmission period
Very long radio range
Reference:TX TEMP CONT1 600-032

 

This Enless Wireless LoRa / LoRaWAN IP65 transmitter with external temperature contact probe allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -200°C / +250°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.

This temperature transmitter is suitable for many applications including :

  • Temperature monitoring in cold rooms, cooling towers, refrigerated outdoor containers (chemical, agri-food industries, etc.)
  • Cold chain management applied to drug storage and temperature control in hospital environments, housing structures for ageing and/or vulnerable populations.
  • Supervision of HVAC (heating, ventilation, air conditioning).
  • Temperature monitoring in agricultural environments.

This product is LoRa/ LoRaWAN compatible. It allows you to build an operated or private network. In LoRaWAN public mode, high-precision °C data is retrieved through the transmitter and sent to the LoRa network operator cloud at a flexible frequency. In LoRa Enless Wireless private mode, the data is transmitted over the radio to our Modbus receiver, which is usually connected to a gateway. In LoRaWAN’s private mode, the data flows directly from our transmitters to the gateway.
High and low temperature thresholds can be viewed via the supervision system in place which also allows the configuration of alerts.

This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.

 

_____________________________________________________________________________

Temperature and humidity transmitter - External probe

118 x 79 x 43mmTX T&H EXT 600-034
External 1.5m probe
Probe working temperature: -30 / +100°C
Suitable for harsh environments (IP65)
Battery life: > 20 years for 5mn transmission period
Very long radio range
Reference:TX T&H EXT 600-034

This LoRa / LoRaWAN contact/status change transmitter is specifically designed for smart building, security and industrial applications.

It meets all types of ON/OFF status change monitoring needs thanks to its two TOR inputs (binary output signal).

The main uses of contact transmitter monitoring are :

  • Presence, break-in and access control :
    –> Monitoring of door openings and closures in office environments, or security gates in industrial areas (warehouses, machine access, etc.).
  • Monitoring of machines and systems :
    –> Detection of system failures, monitoring of machine operating times, level alerts, etc.

The robustness of our transmitter – IP 65 enclosure – and its high environmental tolerance (-20°C / +55°C) allow it to withstand any type of environment.

Real-time alerts from the Enless Wireless contact/status change transmitter via its two dry contact interfaces will allow you to implement quick actions in response to the received messages.

This product is LoRa/ LoRaWAN compatible. It allows you to build an operated or private network. In LoRaWAN public mode, data is retrieved through the transmitter and sent to the LoRa network operator cloud. In LoRa Enless Wireless private mode, the data is transmitted over the radio to our Modbus receiver, which is usually connected to a gateway. In LoRaWAN’s private mode, the data flows directly from our transmitters to the gateway.

 
________________________________________________________________

Temperature transmitter - Embedded sensor

118 x 79 x 43mmTX TEMP INS 600-031
Embedded temperature sensor
Working temperature: -20 / +55°C
Suitable for harsh environments (IP65)
Battery life: 5 years for 5mn transmission period
Very long radio range
Reference: TX TEMP INS 600-031

Many sectors (building – smart building, industry, agriculture, etc.) integrate temperature monitoring activities into their processes.

This Enless Wireless LoRa / LoRaWAN “hardened” (IP65) transmitter with integrated temperature sensor is used for temperature monitoring (°C data) for different applications in outdoor environments and/or in areas subject to extreme conditions.

The robustness of our LoRa / LoRaWAN temperature transmitter – IP 65 housing – and its high environmental tolerance (-20°C / +55°C) allow it to withstand any type of environment.

Its integrated, high-precision temperature sensor enables reliable and accurate °C data to be transmitted at a flexible frequency. Alerts identify where high and low-temperature thresholds are exceeded and allow corrective actions to be taken (installation or maintenance on defective heaters, management of windows and doors, air circulation, etc.).

This product incorporates high-performance D-type batteries and gives the Enless transmitter a very high autonomy of up to 15 years.

This product is LoRa/ LoRaWAN compatible. It allows you to build an operated or private network. In LoRaWAN public mode, high-precision °C data is retrieved through the transmitter and sent to the LoRa network operator cloud at a flexible frequency. In LoRa Enless Wireless private mode, the data is transmitted over the radio to our Modbus receiver, which is usually connected to a gateway. In LoRaWAN’s private mode, the data flows directly from our transmitters to the gateway.

Lisätiedot ja hinnastot: 09 566 0920 tai -

PPO Elektroniikka Oy

Kaarelantie 21, 00430 Helsinki

09 - 566 09 20

Tavoitat meidät sekä sähköpostitse että puhelimitse. Toimistomme on avoinna klo 8-16.

 

HENKILÖKUNTA

LASKUTUSTIEDOT

YHTEYDENOTTOLOMAKE

Uutiskirje- ja markkinointirekisterin rekisteriseloste »